Horizontal Tapping Threading Machine

We Introduce ourselves as manufacturers of 'JBEW' Horizontal Tapping Threading Machine. These Machines are suitable for Inside & Outside threading (Go-Not-Go Accuracy) with taps and round split dies respectively. These machines will give good quality & production of your job. These machines run with the help of gear and provided with auto reversing system for the long life of your tools. These machines are easy in operation. Even helper can operate the machine. In all these machine, thread length can be controlled to the desired position & automatically reserved by a built-in stopper. All the shafts hardened, tempered and ground. Tail Stock moves with gun metal bushes on the hard chromed shafts. The machine is fitted on the sheets cabinet and the cast iron base plate. For holding the job traub collets (Type A-25) in its collect fixture. You can cut left & right threading with these machines.

Standard Accessories :

• 3 Phase electrical motor, Reversing switch, Two Speed pulley, V belt
• 2 Nos. die holders (1" & 1 1/2), 2 Nos. Top holders, top holder's spanner.

Range :
Tapping-Threading Machines Model (Horizontal)

• Model TR-20/25 (Capacity 25mm Fine Thread)
• Model TR-20/40 (Capacity 42mm Fine Thread)
• Model TR-20/60 (Capacity 60mm Fine Thread)
• Model TR-20/25 Limit Switch (Capacity 25mm)
• Model TR-20/40 Limit Switch (Capacity 40mm)
• Model Tr-20/60 Limit Switch (Capacity 60 mm)

Optional Accessories (At Extra Cost) :

• Extra
• Die Holders
• Top Holders
• Pulley
• Thru Chuck Fitting
• Jig Fixtures for holding diffcult job
• Coolant Pump
• Collets
• Wooden Box
• Lighting Lamp etc.