08048114291 |
jbtapping@gmail.com |
Leading Manufacturers, Exporters, Wholesaler and Retailer of Pitch Control Tapping Machine Single Spindle, Pitch Control Tapping Machine Double Spindle, Automatic Tapping Machine, ER Collet Drilling & Tapping Machine, Horizontal Tapping Threading Machine, Universal Tapping Machine and Oil Filter Plate Tapping Machine from Delhi.
Business Type | Manufacturer, Exporter, Supplier, Retailer, Wholesaler |
Type | Single Spindle |
Certification | CE Certified |
Weight | 100-1000kg |
Voltage | 440V |
Automatic Grade | Automatic |
Power | 10-15Kw |
Driven Type | Electric |
Warranty | 1 Year |
Download | View |
Preferred Buyer From
Location | Anywhere in India |
We introduce ourselves as manufacturers of "JB" (ATM) Pitch Control Tapping Machine Single Spindle (Pitch Control) This Machine has the capability of running Taps and Dies on the same machine. Internal and outer Thread with Taps and Dies are Possible. The Machine is suitable for tapping and Threading (Go-Not-Go Accuracy) with Tap & Round Split dies respectively. The machine will give good quality and production of your job. It runs with help of gear and provided with automatic and electronic reversing system for the long life of your tools. The spindle of the machine moves forward & backward automatically. This system saves the time of your worker. Your worker is only to tighten & loose the job and for keeping and lifting the job on the Jig. The machine being in vertical position, the chips (Scrap) does not fall on the job and it does not block the Tap. At the parts in the machine are tempered and well ground for long Life.
The travel of the spindle is upto 100mm (4") upward & downward Automatically with the help of lead screw. It can be controlled in the Desire position and automatically reverse by limit switch control stopper. The table of size 150mm (6") X 250mm (10") Suitable for holding the Jig fixtyre or collect fix ture. For holding the job either true chuck or collet fixture A-42 can be use. The machine is provided with one set of lead screw fitted in the machine. For extra lead screw as per your job thread requirement available at extra cost.
This Machine Comes in two models Pitch Control Tapping Machine - Single Spindle and Pitch Control Tapping Machine - Double Spindle which provide High Production with low maintenance. This machine can be customized as per the needs and wants of the customer which can bring High production to the customer. It comes into Fully Automatic Nut Tapping Machine and Semi - Automatic Nut Tapping Machines models also. Pitch Control Tapping Machine - Double Spindle Model, doubles the production with a Single operator doing work of two machines. One operator, One Electrical Motor and working of two machines in a go.
Standard Accessories : 1 H.P. 960 R.P.M. or 1440 R.P.M. Electrical Motor, Coolant Pump, 2 Nos. Die Holder, 2 Nos. Tap Holder, Limit Switch Panel Box, Reversing Switch, One set Tapping Bush As per Your job. V belt, One Nos. Jig Fixture For Your Job.
Range
Specifications
R.P.M |
100-400 |
Electric Motor |
1 H.P. 3 Phase 1440 R.P.M. |
Overall Length |
L-40"X20"X72" |
Weight |
200 kg. (Approx.) |
Capacity |
20 mm – Coarse Pitch 40mm – Fine Pitch |
Business Type | Manufacturer, Exporter, Supplier, Retailer, Wholesaler |
Voltage | 110V, 220V |
Power | 0-5Kw, 10-15Kw, 15-20Kw, 20-25Kw |
Driven Type | Electric |
Warranty | 5years |
Weight | 100-1000kg |
Application | Drilling |
Automatic Grade | Automatic |
Preferred Buyer From
Location | Anywhere in India |
Business Type | Manufacturer, Exporter, Supplier, Retailer, Wholesaler |
Type | Automatic |
Voltage | 380V |
Condition | New |
Power | 10-15Kw |
Driven Type | Electric |
Motor Power(RPM) | 0.55KW/1000 |
Spindle Speed(PPM) | Single Speed(According to Tap Size) |
Spindle Travel | 80mm |
Speeds | 40 Pieces per minute |
Preferred Buyer From
Location | Anywhere in India |
JB Automatic Tapping Machine
Business Type | Manufacturer, Exporter, Supplier, Retailer, Wholesaler |
Use | Drilling Metal |
Weight | 100-200kg |
Voltage | 110V |
Condition | New |
Automatic Grade | Automatic |
Power | 6-9kw |
Driven Type | Electric |
Warranty | 5years |
Preferred Buyer From
Location | Anywhere in India |
We Manufacture , Trade and Export a wide range of ER Collet Mechanism Holders for Drilling and Tapping Purposes. Drilling and Tapping Holders are widely Manufactured by us for our Tapping Machines. We also manufacture Holders for CNC Lathe Machines and Vertical Machining Center Machines. These Holders are manufactured on CNC Machines and are used for precision work.
Business Type | Manufacturer, Exporter, Supplier, Retailer, Wholesaler |
Type | Horizontal |
Certification | CE Certified |
Weight | 100-1000kg |
Voltage | 220V |
Automatic Grade | Automatic |
Power | 1-3kw |
Driven Type | Electric |
Warranty | 1 Year |
Download | View |
Preferred Buyer From
Location | Anywhere in India |
We Introduce ourselves as manufacturers of 'JBEW' Horizontal Tapping Threading Machine. These Machines are suitable for Inside & Outside threading (Go-Not-Go Accuracy) with taps and round split dies respectively. These machines will give good quality & production of your job. These machines run with the help of gear and provided with auto reversing system for the long life of your tools. These machines are easy in operation. Even helper can operate the machine. In all these machine, thread length can be controlled to the desired position & automatically reserved by a built-in stopper. All the shafts hardened, tempered and ground. Tail Stock moves with gun metal bushes on the hard chromed shafts. The machine is fitted on the sheets cabinet and the cast iron base plate. For holding the job traub collets (Type A-25) in its collect fixture. You can cut left & right threading with these machines.
Standard Accessories :
Range :
Tapping-Threading Machines Model (Horizontal)
Optional Accessories (At Extra Cost) :
Business Type | Manufacturer, Exporter, Supplier, Retailer, Wholesaler |
Type | Automatic |
Certification | CE Certified |
Weight | 100-500kg |
Voltage | 380V |
Power | 1-3kw |
Driven Type | Electric |
After-sales Service Provided | Spare Parts |
Preferred Buyer From
Location | Anywhere in India |
We can make timely delivery of bulk as well as retail orders courtesy a wide vendor, distributor and logistic service provider base. The product basket we deliver is available in Delhi(India) and across the nearby markets ensuring complete customer satisfaction.
Salient Features
Specifications of Tapping Capacity
In Steel | 10 mm |
In Cast Iron | 13 mm |
In Alluminium | 15 mm |
Spindle Travel Distance | 60mm |
Pindles centre to column | 180 mm |
Spindle nose to table max | 340 mm |
Spindle nose to base max. | 630 mm |
Column Diameter Table | 58 mm |
Shape | Square |
Size | 275 x 275 mm |
Base Working Area | 265 x 265 mm |
Floor Area Required | 320 x 460 mm |
No. of Speed | 3 |
Motor Required: With 1440 RPM motor | 1 HP |
Forward | 150, 245, 400 |
Backward | 255, 350, 545 |
Total Height | 1180 mm |
Machine weight without electrical | 100 Kg.(approx.) |
Standard Equipment | Main & Motor Pulley, Drill chuck & switch plate. |
Extra Equipment Required | Motor, starter & V-belt. |
Business Type | Manufacturer, Exporter, Supplier, Retailer, Wholesaler |
Type | Oil Filter Plate Tapping Machine |
Use | Drilling |
Color | Black, Grey |
Condition | New |
Automatic Grade | Automatic, Manual |
Driven Type | Electric, Hydraulic |
Preferred Buyer From
Location | Anywhere in India |
We JB Engineering Works also Manufacture Machines for Oil Filter Plates.
We Manufacture Single Spindle Tapping Machine , Double Spindle Tapping Machine , Multi Spindle Tapping Machine , Horizontal Tapping Machine and other Special Purpose Machines for Oil Filter Plates.
This Machine is specially designed for high speed and low rate threads for Oil Filter Plates
Specifications of Tapping Capacity
In Steel | 10 mm |
In Cast Iron | 13 mm |
In Alluminium | 15 mm |
Spindle Travel Distance | 60mm |
Pindles centre to column | 180 mm |
Spindle nose to table max | 340 mm |
Spindle nose to base max. | 630 mm |
Column Diameter Table | 58 mm |
Shape | Square |
Size | 275 x 275 mm |
Base Working Area | 265 x 265 mm |
Floor Area Required | 320 x 460 mm |
No. of Speed | 3 |
Motor Required: With 1440 RPM motor | 1 HP |
Forward | 150, 245, 400 |
Backward | 255, 350, 545 |
Total Height | 1180 mm |
Machine weight without electrical | 100 Kg.(approx.) |
Standard Equipment | Main & Motor Pulley, Drill chuck & switch plate. |
Extra Equipment Required | Motor, starter & V-belt. |
Hi! Simply click below and type your query.
Our experts will reply you very soon.